TV
SS 4.2
The Broadcast Tools® SS 4.2 provides matrix audio switching of 4 stereo inputs to 2 stereo plus 2 mono outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The SS 4.2 may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or the multi-drop RS-232 serial port. Installation is simplified with removable screw terminals.
- Separate input selection pushbuttons are provided for each output channel.
- Three switching modes. Interlock, overlap and mix.
- Internal audio activity/silence sensors monitor both output channels. Each is equipped with front panel LED indicators; spst alarm relays and adjustable alarm delay and restore duration. Sensitivity is factory set at –34db.
- Power-up selection of inputs to outputs, mute or last source selected.
- Stereo headphone amplifier with front panel output selection switch, headphone jack and level control.
- Most configuration options via rear panel dipswitches.
- 16 input GPI port (PIP) with LED indicator.
- 4 open collector channel status outputs or programmable via burst commands.
- 4 spst relay outputs with multiplex function on output two.
- Programmable via burst commands.
- Multi-turn input and output level controls.
- Electronically balanced stereo inputs.
- Electronically balanced stereo and monaural outputs.
- Low noise and distortion circuitry.
- Remote control of front panel functions and status.
- Multidrop RS-232 serial port with data activity LED.
- Multiple units may be cascaded to expand inputs.
- Depluggable screw (EURO) terminals for ALL connections.
