FEATURES:
350 W RF Output
Automatic “one-click” linear and non linear pre-correction
Fully Solid State
Modular Construction
Individual Air Cooled Drawers
SNMP Interface and PC Configurable
Soft-start and Power Factor Correction
Fully Self protected LDMOS Technology
OPTIONAL:
Translator option (Receiver/Decoder)
AT7001-1 options 3, 4, 5, and 6
Spares Kit
Set of Wheels (Total height with wheels 43”)
Technical:
Transmitter Type Number AT7350-1
Transmitter/Translator Power Output (W) 350
Transmitter / Translator Size (W x D x H - Inches) 27.7”x45.7”x39.2”
Number of PA’s 1
RF Connector Type 7/8” Flanged
Transmitter / Translator Weight (lbs) 418
Heat Load of each Transmitter/ Translator (BTU) 5,900
Air Flow (CFM) 540
Power Consumption (Maximum) 2690
Operation AC Voltage (Volts) / Frequency (Hz) 208 / 60
General:
Serial Interface RS 232
Oscillator Synth by PLL
Internal Time base 10 MHz OCXO
Frequency Stability (including Power Factor Correction) +/- 0.3 ppm
Ideal Room Temperature Range (degrees F) 40 to 90
Ideal Room Humidity Levels 0 - 80%
|
INPUTS:
Transport Stream Input Compliant to ATSC/MPEG2
SMPTE 310
YES
Transport Stream Input - ASI YES
Transport Stream Connector 75 Ohm BNC
Transport Stream Datarate - SMPTE 310 19.39 Mbps
Transport Stream Datarate - ASI 270 Mbps
External Time Base 10 MHz (0-10dBm)
External Time Base connector 50 Ohm BNC
OUTPUTS:
Frequency Range UHF Ch 14-69
Pilot Frequency Overall Stability +/-0.3 ppm
Peak-to-peak Amplitude Frequency Response <0.15 dB
Peak-to-peak Group Delay <15 nS
Phase Noise @20kHz Offset <-104 dBc/Hz
Modulation Error Ratio (MER) > 38 dB (EQ. ON)
Output Sample Connector N Type
Frequency Adjustment Steps 1 Hz
Symbol Rate 10.76 MHz
Digital to Analog Converter 16 bit
Test Signal - PRBS Pseudo Random Bit Sequence YES
|
