FEATURES:
Hyperterminal RS232 Interface
·System Configuration and alarms
·LO Leakage Supression
·Image Frequency Supression
·Power Levels
Performance:
·Shoulder attenuation: < -47dB @ ±3MHz
·MER: ³34dB
Protections:
·Power Supply: Over-Current, over voltage
·Power Amplifier over temperature
·Refletecd Power
Self-cooling
TS rate adaptation
PCR Re-stamping
LDMOS technology
IF Complex Modulation
Adaptive Non-linear Pre-correction at Factory
adjustment
Soft Start
ASI / SMPTE310M compatible
Data / Null Packets rate measurement
OPTIONAL:
External 10MHz reference input allows optional GPS
measurement synchronization
INCLUDED:
Non-Linear Pre-correction at Factory
Linear pre-correction at Factory
English manual
INPUTS:
Transport Stream Input ATSC/MPEG2, compliant to
SMPTE310M or ASI
Transport Stream connector 75W BNC
Transport Stream data rate 19.39Mbps (SMPTE310M)
/ 270Mbps (ASI)
External time base 10MHz (0 to +10dBm)
External time base connector 50W BNC |
OUTPUT:
RF Output Power 60Wrms
RF output connector N Female
Modulation Mode 8VSB. All-Digital Complex IF
modulation
IF 18.833916MHz
Channel Bandwidth 6MHz
Test Signal PRBS, Pseudo Random Bit
sequence
Frequency Range UHF, Ch14 to Ch69 (4 bands)
Digital/Analog Converter 16 bit
Pilot frequency overall
stability ±0.3 ppm
Peak to peak frequency
response < 0.2dB
Peak to peak group delay < 20ns
Conducted spurious
and harmonics < -60 dBc, FCC 47 Part74
Radiated spurious
and harmonics < -60dBc, FCC 47 Part74
MER
(Modulation Error Rate) > 34dB (transmitter output)
GENERAL:
Serial interface RS 232
Oscillator Synthesized by PLL
Internal time base 10MHz OCXO
Frequency stability ±0.3 ppm
Power Supply(50/60Hz) 208/240Vac, biphase, 3 wires
AC input range 180Vac ~ 250Vac
AC consumption 330W
Station temperarture range from 40°F to 90°F
Humidity range from 0 to 80%
Dimensions (inches) 10.47 H, 19 W, 22.05 D
Weight (kg) NET: 23
|
