5 bi-directional RS232 inputs/outputs for computer, modem, remote sign board, character generator
6 Audio inputs on standard models. All audio inputs and outputs are transformer isolated from encoder-decoder board.
Automatic interruption of stereo program lines when pre-selected header code is received for insertion of alert message on transmitter. No external relay panel is required.
2 minutes of digital audio storage (5 kHz)
5 programmable relays to supply contact closures to handshake with automation equipment or signal other equipment.
25 pin parallel printer port for external printer to keep E.A.S. log.
Alert is displayed on a 4 line 40 character back lighted LCD display for rapid interpretation of alert message. Alert message can also be scrolled on a remote sign board, a computer screen or with a character generator on a video monitor.
20 key keypad to set input level.
Can have password code that will be known only by those who will be adjusting the equipment.
Automatic reset of decoder after 2 minutes.
The stored audio message can be routed to the speaker for review so that the urgency of the message can be gauged.
Will operate over audio input levels from 0.14 V to 2 V R.M.S.
Diagnostic information can be printed out on a printer if unit is malfunctioning and can be faxed to us for analysis.
Quality 2 1/2 inch 8 ohm front panel QUAM speakers for clear audio.
Non-volatile memory and non-volatile voice storage.
4 layer board with all signal traces on top and bottom and all IC's mounted in sockets for ease of repair.
Unit has a CMOS EPROM 32 PIN 1MB for future changes.
Units are programmed for your location at no charge.
EAS Decoder can be upgraded to EAS encoder-decoder at minimal cost if station expands operation by replacing a socketed EPROM.
